BWBZG - MIL-L-9000 H 9250 QUAL.# ARA-9000-23
- MSDS: BWBZG
- Manufacturer: IMPERIAL OIL CO INC
- Product Name: MIL-L-9000 H 9250 QUAL.# ARA-9000-23
- National Stock Number: 9150-00-181-8097
Product Identification
Product ID:MIL-L-9000 H 9250 QUAL.# ARA-9000-23
MSDS Date:09/27/1994
FSC:9150
NIIN:00-181-8097
MSDS Number: BWBZG
Responsible Party
MORGANVILLE, NJ 07751
US
Emergency Phone: 908-591-9400/FAX -8825
Info Phone: 201-591-9400 - RICHARD ROBINSON
Cage: 58563
Contractor
Telephone: 732-591-8825
Cage: 58563
Ingredients
REFINED HEAVY PARAFFINIC DISTILLATES
CAS: 64741-88-4
Fraction By Weight: >98%
OSHA PEL 5 MG/M3 (OIL MIST)
ACGIH TLV: 5 MG/M3 (OIL MIST)
ZINC DIALKYLDITHIOPHOSPHATE & ZINC DIARYLDITHIOPHOSPHATE
CAS: 68649-42-3
Fraction By Weight: .03-.04%
DISTILLATES, HYDROTREATED HEAVY PARAFFINIC
CAS: 64742-54-7
RTECS: PY8035500
Fraction By Weight: .6-.7%
OSHA PEL 300 PPM
ACGIH TLV: 300 PPM
CHLORINE AS CHLORO-ORGANO COMPLEX
CAS: 7782-50-5
RTECS: FO2100000
Fraction By Weight: .04-.05%
OSHA PEL C 1 PPM
ACGIH TLV: 0.5 PPM/1 STEL; 9394
EPA Report Quantity: 10 LBS
DOT Report Quantity: 10 LBS
CALCIUM AS PHENATE AND/OR SULFONATE
CAS: 7440-70-2
RTECS: EV8040000
Fraction By Weight: .4-.5%
Hazards
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:WHILE THIS PRODUCT MAY IRRITATE THE
SKIN FROM PROLONGED SKIN CONTACT, THERE IS NO MEDICAL OR
TOXICOLOGICAL EVIDENCE THAT IT IS AN IRRITANT, A CORROSIVE OR A
CARCINOGEN. IT HAS A LOW ORDER OF ORAL & DE RMAL TOXICITY.
INHALATION OF PRODUCT MIST MAY CAUSE PULMONARY PROBLEMS WHICH, IF
NOT TREATED, MAY CAUSE PULMONARY INJURY
Explanation of Carcinogenicity:NO DATA AVAILABLE
Effects of Overexposure:FROM HUMAN EXPERIENCE & THE AVAILABLE TECHNICAL
DATA CONCERNING THIS PRODUCT & DUE TO ITS LOW ORDER OF DERMAL, ORAL
& INGESTIVE TOXICITY, THE SIGNS AND SYMPTOMS OF OVER-EXPOSURE ARE
UNKNOWN.
Medical Cond Aggravated by Exposure:DIRECT CONTACT WITH THE EYES MAY
CAUSE EYE IRRITATION. PROLONGED SKIN CONTACT MAY CAUSE SKIN
IRRITATION.
First Aid
First Aid:IF SWALLOWED, DO NOT INDUCE VOMITING. CALL PHYSICIAN
IMMEDIATELY. IF SPLASHED INTO THE EYES, PURGE WITH COPIOUS AMOUNT
OF WATER. IN CASE OF SKIN CONTACT, CLEANSE WITH WATERLESS SOAP
FOLLOWED BY THOROU GH WASHING WITH SOAP & WATER.
Fire Fighting
Flash Point:450F,232C
Extinguishing Media:CARBON DIOXIDE, WATER FOG, FOAM OR DRY CHEMICAL.
Fire Fighting Procedures:WEAR MESA/NIOSH APPROVED SELF-CONTAINED
BREATHING APPARATUS. USE WATER SPRAY TO COOL EXPOSED TANKS, DRUMS
AND PERSONNEL.
Unusual Fire/Explosion Hazard:NONE.
Accidental Release
Spill Release Procedures:DIKE & CONTAIN SPILL WITH INERT MATERIAL
(SAND, EARTH, FULLERS EARTH, ETC.). RECOVER OR DISPOSE OF DIKED
LIQUID. PREVENT MATERIAL FROM GETTING INTO SEWER & OPEN BODIES OF
WATER. AREA MAY BE SLIPPERY - PREVENT FALLS.
Handling
Handling and Storage Precautions:THESE LUBRICANTS BECOME VERY VISCOUS
WHEN STORED AT LOW TEMPERATURES. THEY CONGEAL AT -12 TO -32C. USE
PRODUCT WITH CAUTION AROUND OPEN FLAMES, SPARKS
Exposure Controls
Respiratory Protection:USE SUPPLIED-AIR RESPIRATORY PROTECTION IN
CONFINED OR ENCLOSED SPACES IF NEEDED.
Protective Gloves:IMPERVIOUS.
Eye Protection:SPLASH GOGGLES
Other Protective Equipment:EYEWASH FACILITY.
Work Hygienic Practices:REMOVE CONTAMINATED CLOTHING AND LAUNDER OR DRY
CLEAN BEFORE RE-USE. OIL SOAKED SHOES SHOULD BE DISCARDED.
Supplemental Safety and Health
EMPTY CONTAINER WARNING! "EMPTY" CONTAINERS RETAIN RESIDUE (LIQUID
AND/OR VAPOR) AND CAN BE DANGEROUS. DO NOT PRESSURIZE, CUT, WELD,
BRAZE, SOLDER, DRILL, GRIND OR EXPOSE SUCH CONTAINERS TO HEAT, FLAM
E, SPARKS OR OTHER SOURCES OF IGNITION.DO NOT ATTEMPT TO CLEAN,
SINCE THE RESIDUE IS DIFFICULT TO REMOVE.
Chemical Properties
HCC:V6
Boiling Pt:B.P. Text:600F,316C
Melt/Freeze Pt:M.P/F.P Text:0
Vapor Pres:1 @20C
Vapor Density:1 (AIR=1)
Spec Gravity:1 (WATER=1)
Evaporation Rate & Reference:1 (N-BUTYL ACETATE=1)
Solubility in Water:0
Appearance and Odor:DARK RED - ODORLESS.
Stability
Stability Indicator/Materials to Avoid:YES
CONTACT WITH STRONG OXIDIZERS.
Hazardous Decomposition Products:ONLY WHEN BURNING - CARBON MONOXIDE &
CARBON DIOXIDE, SULFUR & NITROGEN COMPONENTS.
Disposal
Waste Disposal Methods:INCINERATE IN APPROVED EQUIPMENT OR LANDFILL
CONTAMINATED DIKING MATERIAL ACCORDING TO CURRENT LOCAL, STATE AND
FEDERAL REGULATIONS. THIS APPLIES TO UNRECOVERABLE LIQUID AS WELL.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.